Raw materials determine the quality of the machine-made charcoal. Shuliy machinery new machine-made charcoal machine equipment manufacturers have always believed that it is suitable for the machine-made charcoal industry. Many users of Shuliy are very concerned about the quality when consulting the new machine-made of charcoal machine equipment. Shuliy users also hope to buy To the qualified new machine-made of charcoal machine equipment, Shuliy Machinery analyzes the quality of the new machine-made of charcoal machine equipment for the majority of users.
Shuliy’s new machine-made of charcoal machine equipment is fully in line with the production standards, so in the case of other factors are qualified, it will inevitably produce high-quality good charcoal. However, the quality of raw materials also plays a certain role in whether it can produce high-quality charcoal. Because of the composition of the raw materials, there are two factors that determine the quality of the carbon, that is, the amount of raw material lignin and the composition of the fiber. The former determines the carbon content of the finished product, while the former directly affects the density and strength of the finished product. This shows the importance of the two contents of raw materials.
In addition to the above two points, in addition to the size of the raw materials on the machine-made of the new machine-made of charcoal machine equipment production charcoal should also be taken into account. Excessively large raw materials need to be crushed before they can be used, such as wood shavings. Raw materials with too small volume need to be mixed with raw materials with slightly larger particle size and higher density, such as hibiscus, sanding powder, etc. Since these raw materials are very fluffy and light in weight, it is difficult to automatically fall into the molding zone, so it is necessary to mix Other raw materials are produced together. The standard for measuring the volume of raw materials is to see if they can continue into the forming zone continuously, evenly and sufficiently.
The indicator light of the power supply may not be bright. It may be that the power supply of the new machine-made charcoal machine equipment is not connected well, or the fuse of the equipment may be blown, or the indicator light of the new machine-made charcoal machine equipment may be damaged. If the above three situations occur, you can judge according to the situation at the time and make corresponding repairs.
If the motor does not start normally, there may be damage to the control button of the new machine-made charcoal machine equipment. It may also be that the three-phase power is connected to the two-phase power. It may also be that the local voltage frequency does not conform to the new machine-made charcoal. Required for machine equipment. When the above faults occur in the equipment, it is necessary to make corresponding repairs as soon as possible.
Shuliy’s new machine-made of charcoal machine equipment is also likely to be the temperature of about four Baidu required to produce, which can not be achieved anyway. When this happens, there are only three aspects that we can consider, such as the power supply voltage used by the device is too low, or the resistance heating coil of the device is damaged, or the heating coil wire that you replaced the device. However, the selected model does not match the wire. In these cases, it is possible that the heating temperature will not be reached. In this case, you need to make judgments and repairs according to the situation at the time.
The raw materials affect the quality of the machine-made of the new machine-made of charcoal machine equipment production, so the user needs to choose the right raw materials, and the long-term production of Shuliy’s new machine-made charcoal machine equipment will have certain failures, so Shuliy users need to repair in time, so It can guarantee the production efficiency and effect of the new machine-made charcoal machine equipment.