Some details of daily maintenance of charcoal making machine

The maintenance of the charcoal making machine is an extremely important and regular job. It should be closely coordinated with its operation and maintenance, and there should be full-time personnel to check on duty.

1. The shaft of the charcoal making machine bears the full load of the negative machine, so good lubrication has a great relationship with the life of the bearing. It directly affects the service life and operating rate of the machine. Therefore, the injected lubricant must be clean and the seal must be good . The main oil injection point of this machine

1.1) Rotating bearing

1.2) Roller bearings

1.3) All gears

1.4) Movable bearing, sliding plane.

2. Newly installed wheels are prone to loosening and must be checked frequently.

3. Pay attention to whether the work of each part of the machine is normal.

4. Pay attention to check the degree of wear of easy-wear parts, and pay attention to replace worn parts at any time.

5. The bottom plane of the mobile device should be fixed with anchor screws to prevent movement, resulting in serious accidents.

6. If there is impact sound when the rotating gear is running, it should be stopped and checked immediately, and eliminated