Shuliy’s new wood chip charcoal machine production line is made of bamboo, wood, sawdust, peanut shell, corn cob and other woody plants pulverized into wood particles by wood chip mill into 10mm, dried in a dryer and then placed in a carbonization furnace. A machine that performs carbonization. The charcoal produced by Shuliy’s new wood chip charcoal machine production line has high density, small volume, and good flammability. It can replace fuelwood and coal. The charcoal products produced are especially suitable for heating in autumn and winter in the northern region, heating in greenhouses or as ordinary living fuel.
The production process of the new wood chip charcoal machine production line: material crushing, drying, rod forming, carbonization, the main equipment are: crusher, dryer, bar machine, carbonization furnace. It mainly consists of a bar machine and a dryer and is a special machine for manufacturing charcoal. The dryer can automatically cut the material and dry it once. The exhaust port is not dipped. The discharge port does not spray the material and falls naturally. It can be used for the production of four-rod machines. The automatic temperature control rod making machine can adjust the rod at any time. Compactness, this technology not only guarantees the quality of the stick. Branches, leaves, sawdust and other agricultural products are used as raw materials. After crushing, they are pressurized and densified. Because they can replace traditional coal, they are called “straw coal”. It is an emerging fuel. Production and processing procedures of the new wood chip charcoal machine production line: the material is cut by a mower or crushed by a pulverizer, and the material grain length and water content are within the specified range: the material is fed by a loading machine (belt conveyor) or manually It is evenly sent to the upper mouth of the molding machine, and the press forming is the finished product.
The process of making charcoal is generally divided into four stages, the pulverization stage, the drying stage, the forming stage and the carbonization stage, each of which has its own considerations in these steps. For example, in the carbonization stage, the old old-fashioned earthen kiln was carbonized, the black smoke was skyrocketing, and the smoke was rolling, which caused great harm to the environment. The national government also banned the method of charcoal burning. But now Shuliy Machinery has developed a new carbonization method, which is an environmentally friendly carbonization furnace. This major research can help us solve many problems. The effect of carbonization furnace on environmental protection is obvious. With the continuous improvement of production technology, the design of new carbonization machine is more reasonable, the structure is more compact, the production process will be safer and more reliable, and the output of finished products will be further improved.
The carbonization furnace is a charcoal product produced by subjecting crop waste products such as straw, rice husk, sawdust and bamboo chips to a series of physical and chemical changes, and finally carbonization. The product is highly efficient, green and non-polluting, and has a wide range of sales prospects and development prospects. The new carbonization furnace adds a flue gas recovery device based on the traditional equipment. The flue gas generated in the carbonization process is automatically recycled and supplied to the carbonized combustion energy. There is basically no waste discharge, and the energy consumption is small, and the raw materials produced by itself can be used. Helping to produce by yourself, this will greatly help to reduce the emission of smoke in the charcoal manufacturing process. There is no gas emission from the atmosphere during the production process, and the double effect of environmental protection and energy conservation is achieved. The addition of this technology has great benefits for reducing user input, eliminating the need to provide a large amount of heat source in the carbonization process, which is important for improving revenue and for environmental protection.